Steel laminae coupling

Steel laminae coupling

Steel laminae coupling

All-steel couplings with laminae sets made of high-strength and stainless spring steel.

The steel laminae sets were developed based on FEM calculations.

Considering the necessary displacement capacity of the steel laminae coupling, we realized the optimum shape with regard to torque transmission and torsional stiffness.

RADEX®-N Steel Laminae Couplings

All-steel laminae coupling. The heart of the RADEX-N steel laminae coupling are the laminae sets along with their connection to hubs and spacers.

The high-strength and special dowel screws are reciprocally screwed to hubs and spacer allowing for a combination of friction and positive-locking fit.

RIGIFLEX®-N Steel Laminae Couplings

The RIGIFLEX®-N steel laminae couplings are used wherever reliable and backlash-free torque transmission with simultaneous shaft displacement is required. They are connected fully backlash-free with hubs and flanges via positive-locking dowel screws.

RIGIFLEX® High-Performance Couplings

The RIGIFLEX-HP steel laminae couplings (High-performance coupling) are used for severely high-speed drives with a circumferential speed of up to 200 m/s.

The special properties of this coupling type are smooth running even with highest speeds and the weight-optimised design. Due to the low coupling weight of these steel laminae couplings the loads on driving and driven side are reduced as far as possible.